Justin Posted April 17, 2006 Share Posted April 17, 2006 I need to get to these to fit a temp sensor 'T' piece. I have an extra tranny cooler fitted too. Do I have to take the front nose off to be able to fit the t piece or is there an easier access route to the oil lines? Cheers Quote Link to comment Share on other sites More sharing options...
JohnK Posted April 17, 2006 Share Posted April 17, 2006 The hard pipes join to hose toward the front of the car, can be easily seen by taking the under tray off and the big plastic intercooler pipe. IIRC one goes straight foward the other hard pipe bends 90 degrees and heads toward the passenger side front whel. Quote Link to comment Share on other sites More sharing options...
Justin Posted April 17, 2006 Author Share Posted April 17, 2006 The hard pipes join to hose toward the front of the car, can be easily seen by taking the under tray off and the big plastic intercooler pipe. IIRC one goes straight foward the other hard pipe bends 90 degrees and heads toward the passenger side front whel. Top man thanks John. Quote Link to comment Share on other sites More sharing options...
terribleturner Posted April 17, 2006 Share Posted April 17, 2006 Here's a pic Quote Link to comment Share on other sites More sharing options...
JohnK Posted April 17, 2006 Share Posted April 17, 2006 Heres a pic on the car, hard pipes have been removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.