redsupratt6spd Posted January 16, 2005 Share Posted January 16, 2005 I've a 93 j spec tt 6, what sort of oil should i be running? At the min i'm using mobil 1 ow-40 fully synthetic is this ok or is it too thin? Also whoever changed the spark plugs they have broken the clips that hold the coil packs in place and even in one the wires have been pulled out and don't fit back in place tightly. would anyone know how to fix this? many thanks jamie Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted January 16, 2005 Share Posted January 16, 2005 Its too thin. I would recommend Valvoline Synpower 5w50, Millers 10w40 or a Motul oil. Regards, Gaz. Quote Link to comment Share on other sites More sharing options...
redsupratt6spd Posted January 16, 2005 Author Share Posted January 16, 2005 cheers gaz,will sort that oil out. anyone any ideas about the broken coil pack clips and in one to fit the wires back in properly.would you have to buy a new set or is there anyone breaking a j spec 93 tt engine? thanks jamie Quote Link to comment Share on other sites More sharing options...
richardharmon Posted January 22, 2005 Share Posted January 22, 2005 cheers gaz,will sort that oil out. anyone any ideas about the broken coil pack clips and in one to fit the wires back in properly.would you have to buy a new set or is there anyone breaking a j spec 93 tt engine? thanks jamie Do you mean the plugs that connect the wiring loom to the coil packs? If so then the connectors are cheap and easy to fit, you can break the old connectors apart and connect new ones using the existing pins. The part number for the connector housing is 90980-11246, the EPC seems to list them as a condenser for some strange reason, and hence the problems I had finding them in the first place. Edit: That part number is for one housing only, you'll obviously need 6 of them. Quote Link to comment Share on other sites More sharing options...
absz Posted January 22, 2005 Share Posted January 22, 2005 The part number for the connector housing is 90980-11246, is that the part number at toyotas, cause had same problem but was told by toyotas that its part of the wiring loom and wont come seperate. Quote Link to comment Share on other sites More sharing options...
redsupratt6spd Posted January 22, 2005 Author Share Posted January 22, 2005 Cheers Richard,yeah toyota said they couldn't find them at all.thanks again and hopefully this should do the trick. Quote Link to comment Share on other sites More sharing options...
redsupratt6spd Posted January 22, 2005 Author Share Posted January 22, 2005 Thanks got the part number now and will go down to toyota and get them ordered. Yeah i had the same problem with toyota over here.cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.