green_dragon Posted December 28, 2004 Share Posted December 28, 2004 Just a qick question, Does anyone have the wiring diagram for the Toad Ai606? When I got it fitted, the ''expert installer'' said they couldn't fit total closure because it would be impossible to get the wires into the doors. After fixing my drivers window motor yesterday, I found it to be dead simple. I can find out which the switch wires are, and I know I will need a relay to avoid both windows operating under norml use. So I just need to know which wire is the control wire from the alarm. Any ideas guys (Mr Harwood) Chris Quote Link to comment Share on other sites More sharing options...
merckx Posted December 28, 2004 Share Posted December 28, 2004 ...... Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 28, 2004 Share Posted December 28, 2004 The Toad Ai606 only has a total closure output for those car already fitted with it, ie some BMW, VW, Vauxhall, Jaguar etc. For the Supra, you need a proper window closure module. You'll need to connect a 12v, earth, negative trip from the alarm, (white wire, programmed to be an 'Armed output'), then two wires into the drivers door for the drivers window, and the two wires for the passenger window, you can pick up inside the car from the drivers door wiring. Quote Link to comment Share on other sites More sharing options...
green_dragon Posted December 28, 2004 Author Share Posted December 28, 2004 For the Supra, you need a proper window closure module. You wouldn't happen to have such a device in your vast array of stock would you? Cheers, Chris Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 28, 2004 Share Posted December 28, 2004 Strangely enough... Yes, and I'm back at work tomorrow Call me tomorrow on 01622 683044 and I'll arrange to get one sent out for you Quote Link to comment Share on other sites More sharing options...
green_dragon Posted December 28, 2004 Author Share Posted December 28, 2004 Yes I do! Is it in an email'able format mate cos I would really like a copy. I'm not mine's been wired up properly as some of the features dont work as they're supposed to, i.e I can't ommit interior sensors, and every time the alarm sounds the LED blinks twice - optional sensors. So can I buy, borrow or steal a copy please?? Chris Quote Link to comment Share on other sites More sharing options...
merckx Posted December 28, 2004 Share Posted December 28, 2004 Is it in an email'able format mate cos I would really like a copy. Chris .......... Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 28, 2004 Share Posted December 28, 2004 Not being able to exclude the interior sensors is an inbuilt feature. Nothing you can do with the wiring will stop this feature. As for the alarm falsing and showing the 'optional sensor', do you have any optional sensors fitted? - Glass break, tilt, shock, proximity? Quote Link to comment Share on other sites More sharing options...
green_dragon Posted December 28, 2004 Author Share Posted December 28, 2004 Not being able to exclude the interior sensors is an inbuilt feature. Nothing you can do with the wiring will stop this feature. As for the alarm falsing and showing the 'optional sensor', do you have any optional sensors fitted? - Glass break, tilt, shock, proximity? Yes ... all of the above Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 28, 2004 Share Posted December 28, 2004 LOL, OK, so one of them needs adjusting. Probably nothing to do with wiring though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.