c8sup Posted October 13, 2007 Share Posted October 13, 2007 guys and girls need advice asap. My boost has been playing up now for a while so i reset the controller. I went through the instructions, set the low setting to 0.7 and the high setting to 1.0. When i tested it the boost gauge worked to the setting, but straight after the gauge will not work and is constantly reading 0.1. Any ideas. I tried pressing the two buttons on the gauge but no joy. Any advise will be good, thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now