electronic blitz md boost gauge

[snake]

Has any one the wiring diagram for this gauge pleasei intend to break into the clock wiring

the gauge has a black wire ground ? red wire live ? orange wire neg ? just got it out of the box but unable to understand japanese [shame on me]

[snake]

[SIMON LC]

For a guess red=Live.Black=negative.Orange=illumination (off your side lights)

[Guest chrismtaylorsup]

hi mate i have 3 md boost oil temp and oil pressure.

i would run the power from the cd player i wired the red and orange tigether as in the day time you carnt see what the gages say but if the light is on you can .

[steb9780]

For MD gauges they are the worng way around to what I thought they would be.

 

Red = Switched 12v

Orange = Permanent 12v

Black = Earth

 

Hope that helps, I wired mine to the fag lighter. And then connected the lighter up with reverse polarity The lighter worked but I kept blowing fuses in my sat nav charger.

[steb9780]

Yep here's the thread I installed mine from

 

http://www.mkivsupra.net/vbb/showthread.php?t=110938&highlight=blitz+mirror+drive

[snake]

nice one thanks for all the information:)

The problem i have found so far is the blitz md boost gauge has the two buttons right on the

edge towards the end i was going to fit in the air vent so may go down the A -pillar pod route

if i can find a single pod ,but i may have to get a twin.