RICHARDA Posted November 7, 2004 Share Posted November 7, 2004 Can anyone please advise on the removal of the following for polishing purposes? 1. Power steering fluid resovoir. 2. Throttle body 3. Turbo pipework 4. Turbo heat shield Are these simply unbolt affairs / any gotchas to be wary of? Many thanks Rich Link to comment Share on other sites More sharing options...
lovatt Posted November 7, 2004 Share Posted November 7, 2004 the first 2 can be off in 15mins the second 2 are much more involved, all just bolt on but there are alot of bolts Link to comment Share on other sites More sharing options...
RICHARDA Posted November 7, 2004 Author Share Posted November 7, 2004 Cripes, thanks for the pics, how do you block off the fluid from the PAS resovoir? Ta Rich Link to comment Share on other sites More sharing options...
lovatt Posted November 7, 2004 Share Posted November 7, 2004 i didnt i just drained as much as i needed to off, then once its all back in fill it up with the engine running moving the steering from lock to lock to bleed it Link to comment Share on other sites More sharing options...
RICHARDA Posted November 7, 2004 Author Share Posted November 7, 2004 Sorry to be a dumbass but what method did you use to drain off the excess? Ta Rich Link to comment Share on other sites More sharing options...
lovatt Posted November 7, 2004 Share Posted November 7, 2004 i yanked the pipe off and got a cloth before the mrs noticed it on the drive Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now