gaz1 Posted July 2, 2007 Share Posted July 2, 2007 as the title says how do these come off;) Link to comment Share on other sites More sharing options...
Jezz Posted July 2, 2007 Share Posted July 2, 2007 With a large hammer. Link to comment Share on other sites More sharing options...
merckx Posted July 2, 2007 Share Posted July 2, 2007 Loosen everything then take them off. Link to comment Share on other sites More sharing options...
suprarob Posted July 2, 2007 Share Posted July 2, 2007 does this help ? http://www.mkiv.com/manual/manualtt/rear_axle_hub_replacement/index.html Link to comment Share on other sites More sharing options...
r1george Posted July 3, 2007 Share Posted July 3, 2007 Just done the N/S rear wheel bearing so had to remove rear hub assembly, I found the biggest problem was removing the ABS sensor, unfortunately I scrapped mine trying to get it out and there £121 from Toyota. So NO ABS or traction at the mo. TBH it's wasn't rocket science but it was a pain in the arse (literally) and time consuming, anyone with a bit of mechanical sense could do it. And if you need to replace the bearing you need a press, I used a 10 tonner with no problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now