spaxy Posted June 5, 2007 Share Posted June 5, 2007 going to fit the ARC b.o.v and hard pipe today when it arrives today,just wondering what to do the the stock b.o.v,can i just dissconnet the small vac pipe to stop it working,or would it be best to T into it and run both.advise appriciated. Link to comment Share on other sites More sharing options...
dwayne Posted June 5, 2007 Share Posted June 5, 2007 doesnt that bov fit in the place of the stock one? Link to comment Share on other sites More sharing options...
spaxy Posted June 5, 2007 Author Share Posted June 5, 2007 no mate,the hard pipe and valve replaces the pipe from the turbo outlet down to the intercooler pipe on the inner wing. Link to comment Share on other sites More sharing options...
Class One Posted June 5, 2007 Share Posted June 5, 2007 Cap off the two holes where the stock bov was and connect the vac pipe into your new one. Link to comment Share on other sites More sharing options...
spaxy Posted June 5, 2007 Author Share Posted June 5, 2007 thanks class will will give it a go Link to comment Share on other sites More sharing options...
Daston Posted June 5, 2007 Share Posted June 5, 2007 If I remember rightly 21mm walking stick rubber bottoms (can get from wilkinsons) fit over the wholes a treat and just use a jubily clip to secure them. Link to comment Share on other sites More sharing options...
SimonB Posted June 5, 2007 Share Posted June 5, 2007 If I remember rightly 21mm walking stick rubber bottoms (can get from wilkinsons) fit over the wholes a treat and just use a jubily clip to secure them. That's the badgers, that's one of my favourite tips because it's so unlikely but actually works a treat. You beat me to it though! They have them in B&Q too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now