Vacuum Hose size for boost gauge?

[Supra_Nish]

Hey peeps,

 

Going to attempt a boost gauge install today.

 

What diameter vac hose do i need?

 

I've searched around, got a fair idea of how to fit it but no idea about the vac hose.

 

Also fitting to a pillar pod, where do i get power for the light from?

 

Thanks for help as always

 

[Jake]

Originally posted by Supra_Nish

Also fitting to a pillar pod, where do i get power for the light from?

I believe the rear of the clock is a popular choice.

As for the vac hose, wouldn't it just be whatever size the boost guage needs? You must be able to measure that, right?

[Supra_Nish]

Also the t-piece, urm where the hell do u get one and what size etc?

 

Any help appreciated

 

Cheers

[Supra_Nish]

Originally posted by Jake

I believe the rear of the clock is a popular choice.

As for the vac hose, wouldn't it just be whatever size the boost guage needs? You must be able to measure that, right?

 

 

I could measure the back of the boost gauge i guess, do t-pieces come in sizes to accomadate all sizes?

 

What size is needed for the bit where u actually plug into pressure sensor thingy thing?

 

As u can tell my technical knowledge is formidable!

[LeeT]

Originally posted by Supra_Nish

I could measure the back of the boost gauge i guess, do t-pieces come in sizes to accomadate all sizes?

 

What size is needed for the bit where u actually plug into pressure sensor thingy thing?

 

As u can tell my technical knowledge is formidable!

 

i think either 3 0r 3.5 mm will do the job. any motor factors will have a 3mm t-piece