hodge Posted May 19, 2007 Share Posted May 19, 2007 Ive refitted my intake manifold after fitting a new engine and at abit of a dilema. At the back of the inlet manfold bulkhead side theres 2 threaded holes and a larger centre hole. I cant remember what goes here. I thinks its a water pipe or something. Has anyone a pic of this or can offer me any advise. After fitting the whole engine myself I get stuck on the home straight. Please Help. Link to comment Share on other sites More sharing options...
michael Posted May 19, 2007 Share Posted May 19, 2007 UK TT? (I think I cvan make out a scoop in your pic but that's never fully conclusive). It's not the EGR is it? Link to comment Share on other sites More sharing options...
colsoop Posted May 19, 2007 Share Posted May 19, 2007 I think Michael is right, it sounds like EGR to me too. lthough the manfiodl i ams ending back to you is a Jspec ! Link to comment Share on other sites More sharing options...
hodge Posted May 20, 2007 Author Share Posted May 20, 2007 The car is a j-spec. Im not sur if I explained myself probaly. If you remove the plenuem and throttle body, you can see the intake manifold. there is 6 round pots on here which meet up and corospond to the plenuem when it is refitted. From the front to the back 1-6, after the 6th pot there is 2 threaded holes and a bigger centre hole. I just cant remember what went there. Link to comment Share on other sites More sharing options...
hodge Posted May 20, 2007 Author Share Posted May 20, 2007 Ok guys ive found a pic (thanks to simon B). Appanently its called an intake runner. If you look at the pic its the hole on the far right of the runner. like I said a 2 threaded holes and a bigger hole in the middle. Link to comment Share on other sites More sharing options...
hodge Posted May 20, 2007 Author Share Posted May 20, 2007 Bump Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now