terribleturner Posted April 22, 2007 Share Posted April 22, 2007 .... turn the nipple of the cam cover next to the turbo's?? Looking at the installation of my breather system and want to turn it to face the back of the car rather than the front. Link to comment Share on other sites More sharing options...
terribleturner Posted April 22, 2007 Author Share Posted April 22, 2007 No one Link to comment Share on other sites More sharing options...
JohnK Posted April 22, 2007 Share Posted April 22, 2007 With anything with leverage you can get to hold it, pipe over the end ect, just becareful you dont bend / distort it too much. Link to comment Share on other sites More sharing options...
terribleturner Posted April 22, 2007 Author Share Posted April 22, 2007 So it will actually turn then?? I wasn't sure if it was welded in place for good or not. Link to comment Share on other sites More sharing options...
Lucifer Posted April 22, 2007 Share Posted April 22, 2007 With anything with leverage you can get to hold it, pipe over the end ect, just becareful you dont bend / distort it too much. Agreed, or you can unbolt the pipe from round the back of the head. Link to comment Share on other sites More sharing options...
JohnK Posted April 22, 2007 Share Posted April 22, 2007 It turns resonably freely. Link to comment Share on other sites More sharing options...
terribleturner Posted April 22, 2007 Author Share Posted April 22, 2007 Thanks to both of you, im going outside now Link to comment Share on other sites More sharing options...
Lucifer Posted April 22, 2007 Share Posted April 22, 2007 New gaskets I hope Link to comment Share on other sites More sharing options...
terribleturner Posted April 22, 2007 Author Share Posted April 22, 2007 New gaskets I hope Actually i was just thinking about it before i start. Isn't there a plate in the cam cover? Im guessing this just unbolts? Link to comment Share on other sites More sharing options...
Lucifer Posted April 22, 2007 Share Posted April 22, 2007 Actually i was just thinking about it before i start. Isn't there a plate in the cam cover? Im guessing this just unbolts? A what? Plate? unbolts? Are you cconfusing your supra with some crockery? Link to comment Share on other sites More sharing options...
JohnK Posted April 22, 2007 Share Posted April 22, 2007 Just to clarify. I was talking about the breather pipe in the turbo side of the cam cover. Link to comment Share on other sites More sharing options...
Lucifer Posted April 22, 2007 Share Posted April 22, 2007 Just to clarify. I was talking about the breather pipe in the turbo side of the cam cover. Oh, I was talking about the Exhaust cam cover rear left bolt under the Heater matrix Pipe Inlet. Link to comment Share on other sites More sharing options...
JohnK Posted April 22, 2007 Share Posted April 22, 2007 Easy to get confused without pics. Link to comment Share on other sites More sharing options...
terribleturner Posted April 22, 2007 Author Share Posted April 22, 2007 A what? Plate? unbolts? Are you cconfusing your supra with some crockery? Oh, I was talking about the Exhaust cam cover rear left bolt under the Heater matrix Pipe Inlet. I was getting confussed there to All done now, Thanks again guys Link to comment Share on other sites More sharing options...
Pig Posted April 22, 2007 Share Posted April 22, 2007 Your lucky, iirc mine started to distort when i tried to more it Link to comment Share on other sites More sharing options...
terribleturner Posted April 22, 2007 Author Share Posted April 22, 2007 No it was fine. Was scared to start with but gentle pressure and it started to move Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now