dazla Posted April 1, 2007 Share Posted April 1, 2007 I have a veilside spoiler on my supe at the mo but i'm considering changing it back to the standard stock one. Would this be a straight swap back or would i have holes to deal with and a messy boot. Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted April 1, 2007 Share Posted April 1, 2007 afaik the holes are the same, but you might need to give it a bit of a clean/T-cut after it's off as the dirt gets under and can mark the paint Link to comment Share on other sites More sharing options...
dazla Posted April 1, 2007 Author Share Posted April 1, 2007 Is that a definite jon. Just dont wanna end up with a messed boot. Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted April 1, 2007 Share Posted April 1, 2007 i'm 99% sure the holes are the same, but it's best to wait for confirmation Link to comment Share on other sites More sharing options...
dazla Posted April 1, 2007 Author Share Posted April 1, 2007 will do mate. Come on you lot. Some one must of done this in the past. Link to comment Share on other sites More sharing options...
supra dan Posted April 1, 2007 Share Posted April 1, 2007 i took my veilside off and it definatly used the original holes. as jon says tho there was lots of sticky stuff to peel off Link to comment Share on other sites More sharing options...
dazla Posted April 2, 2007 Author Share Posted April 2, 2007 Cheers guys that's a big help. Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted April 3, 2007 Share Posted April 3, 2007 how do you seal the holes, water will seep through?? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now