UK Supra TT Posted March 19, 2007 Share Posted March 19, 2007 Hi all, I bought some wheels for drag racing my MKIV UK Supra, they are: PCD 5x114.3 17" +38 offset I offered them up to the car and they didn't seem to fit at all! Is there a different fittment on UK supras? The spacing on the studs was quite a bit further apart on my supra than the wheels, im confused, am i being stupid or something?? Any help apreciated, cheers guys Link to comment Share on other sites More sharing options...
Alex Posted March 19, 2007 Share Posted March 19, 2007 5x114.3mm is correct for ALL MKIV Supra's. Link to comment Share on other sites More sharing options...
UK Supra TT Posted March 19, 2007 Author Share Posted March 19, 2007 Hmm that is odd then, i'll have to have another go, thanks for the quick reply Alex Link to comment Share on other sites More sharing options...
i-macca Posted March 19, 2007 Share Posted March 19, 2007 They look in the pic like they may be multi-fitment as in there's two sets of bolt holes with different PCD's? Maybe you just offered up the wrong set of bolt holes? Link to comment Share on other sites More sharing options...
UK Supra TT Posted March 19, 2007 Author Share Posted March 19, 2007 Possibly, I only did it quickly as I had to do something else more urgently, but the other set of holes looked almost straight so they might be for show, from memory is didn't look like there was a lip for the bolt to catch on, if u know what i mean Link to comment Share on other sites More sharing options...
UK Supra TT Posted March 19, 2007 Author Share Posted March 19, 2007 ........infact if you look at the photo you can see what i mean Link to comment Share on other sites More sharing options...
hoff Posted March 19, 2007 Share Posted March 19, 2007 Do they cover the uk brakes? Link to comment Share on other sites More sharing options...
jamesmark Posted March 19, 2007 Share Posted March 19, 2007 UK 17's have an offset of +50 but depends on wheel design Link to comment Share on other sites More sharing options...
UK Supra TT Posted March 19, 2007 Author Share Posted March 19, 2007 Well there going on the back since there for drag racing (I only have two, which have Nitto 555 Drag Tyres on them) they certainly clear the rear brakes Link to comment Share on other sites More sharing options...
garethr Posted March 19, 2007 Share Posted March 19, 2007 If you don't have spigot rings the wheels could have been a good few mm off-centre. Link to comment Share on other sites More sharing options...
UK Supra TT Posted March 19, 2007 Author Share Posted March 19, 2007 If you mean the plasic inserts on the back of the wheel, then I have those so hopefully that should be ok Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now