ajazyasin Posted January 7, 2007 Share Posted January 7, 2007 Ive ripped my aircon out and was wondering if i should leave the compressor in situ or remove it and get a smaller belt? your thoughts are appreciated:) Link to comment Share on other sites More sharing options...
Gamer Posted January 7, 2007 Share Posted January 7, 2007 I would prob leave it in situ, if only because you will not have to fuff about getting a new smaller sized belt. I have to use a smaller then normal belt because of my PHR alt. I can probably get the correct size over here in the UK, but for the moment I have to rely on getting my spare or replacement acc. belt from Dusty in the States. I have recently found a place in the UK the makes belts, I will try them next time. Link to comment Share on other sites More sharing options...
ajazyasin Posted January 7, 2007 Author Share Posted January 7, 2007 Im planning on an alternator from phr as well. What with all the extra fans and HIDs etc, I think its almost a must. see how you get along with the custom belts... thanks;) Link to comment Share on other sites More sharing options...
ajazyasin Posted January 7, 2007 Author Share Posted January 7, 2007 ps. Am i correct in saying that the a/c compressor doesnt put load on the engine if it is not switched on? The outter ring of the pulley seems to spin freely with quite minimal resistance. Link to comment Share on other sites More sharing options...
_Rob_ Posted January 7, 2007 Share Posted January 7, 2007 As far as im aware, the AC compressor does not load the engine when not switched on, and disengages when WOT, meaning power losses are non existent when giving it some beans! Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted January 7, 2007 Share Posted January 7, 2007 II have to use a smaller then normal belt because of my PHR alt. I can probably get the correct size over here in the UK, but for the moment I have to rely on getting my spare or replacement acc. belt from Dusty in the States. I have the relevant Gates belt in my garage if you want me to give you the number? The number stated on the MVP website is for a US belt kit that isn't available in the UK, but you don't need to get the belt from the US. Cost me just under £11. Link to comment Share on other sites More sharing options...
Lucifer Posted January 7, 2007 Share Posted January 7, 2007 Smaller size belt in stock as well as teh conversion kit needed to remove the AC Link to comment Share on other sites More sharing options...
Lucifer Posted January 7, 2007 Share Posted January 7, 2007 I have the relevant Gates belt in my garage if you want me to give you the number? The number stated on the MVP website is for a US belt kit that isn't available in the UK, but you don't need to get the belt from the US. Cost me just under £11. I thought that was the smaller one for the undersized pulley? Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted January 7, 2007 Share Posted January 7, 2007 No, it is for the one needed for the PHR alternator, which I think actually uses a slightly larger belt. Link to comment Share on other sites More sharing options...
Gamer Posted January 7, 2007 Share Posted January 7, 2007 I have the relevant Gates belt in my garage if you want me to give you the number? The number stated on the MVP website is for a US belt kit that isn't available in the UK, but you don't need to get the belt from the US. Cost me just under £11. Cheers mate, that would be great if you could give me the number for the future. Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted January 7, 2007 Share Posted January 7, 2007 Will wander out now and make a note of it. Link to comment Share on other sites More sharing options...
Jake Posted January 7, 2007 Share Posted January 7, 2007 ps. Am i correct in saying that the a/c compressor doesnt put load on the engine if it is not switched on? The outter ring of the pulley seems to spin freely with quite minimal resistance. That's right. It has a magnetic clutch and the pulley just 'free-wheels' when the clutch isn't engaged. Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted January 7, 2007 Share Posted January 7, 2007 Cheers mate, that would be great if you could give me the number for the future. OK, the belt has the following details on it's packaging. Gates Micro-V XF 6PK1980 with a smaller number of 68443 written undrneath. HTH Link to comment Share on other sites More sharing options...
Gamer Posted January 7, 2007 Share Posted January 7, 2007 Cheers mate Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now