Phil Wall Posted June 28, 2001 Share Posted June 28, 2001 Hi Guys, Does anyone know how critical the A- B settings are on a new belt. I have just fitted and new one and the pointer falls about 0.5 mm. outside the B range. Should I take it off and put the old one on,or is this ok? The manual says wrong belt if outside B marks. Link to comment Share on other sites More sharing options...
Guest Ash Posted June 29, 2001 Share Posted June 29, 2001 Is this a Toyota sourced belt? If so, funny it should be outside the marks. I guess you are sure it *is* fitted properly? Hmm, if it *is* a Toyota belt then I'd certainly take it back to them. To my mind those limits are set for good reason and I would want the tensioner about mid-way (as per normal). Yours, J Link to comment Share on other sites More sharing options...
Phil Wall Posted June 29, 2001 Author Share Posted June 29, 2001 No the belt was sourced by Leon. It is just out side the right hand mark inthe B range. Leon said the belt was a slightly different length, hence the slight change in the pointer position. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now