AMG Posted August 13, 2006 Share Posted August 13, 2006 I have got myself a new oil temp gauge and it has come with a sensor which has two wires from it. That is ok but the problem is that there is only 1 wire on the back of the gauge for the sensor and the instructions show a different sensor with a sigle connection. Could it be that the company has changed sensor types and were too lazy to change the instructions or is it wrong. Count one of the wire on the sensor be a ground?! Bit stumped here. Link to comment Share on other sites More sharing options...
bignum Posted August 13, 2006 Share Posted August 13, 2006 yes normally one of the wires will be ground, make sure its a good connection though or you will get a false reading. Link to comment Share on other sites More sharing options...
AMG Posted August 13, 2006 Author Share Posted August 13, 2006 nice one, i will have a play and see if i can get a reading. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now