Paul Laing Posted February 3, 2004 Share Posted February 3, 2004 Just asking this as my clutch is on it's way out i think, my car has about 350bhp but will soon be 1.2 bar, will the clutch not take this? Even if it was new??? Paul Link to comment Share on other sites More sharing options...
Andrew Posted February 3, 2004 Share Posted February 3, 2004 Paul, my clutch has also slipped a couple of times in the high rev range and in 4th gear, seems to be when I'm producing the most torque. I went to find out what bhp the stock clutch can take, and the consensus was up to 450bhp. I have a post about this subject somewhere on here, and Chris Wilson mentioned some new up rated clutches he can fit for around £550. I phoned Toyota and got quoted £600. Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 3, 2004 Share Posted February 3, 2004 The RPS ones are cheaper and come in various power handling specs. Link to comment Share on other sites More sharing options...
Paul Laing Posted February 4, 2004 Author Share Posted February 4, 2004 The RPS ones are the way to go, just wondered how much a stock clutch can take Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now