connor66 Posted June 27, 2006 Share Posted June 27, 2006 Guys I’m thinking of changing from the stock front bumper but need to be mindful of ground clearance on/off my drive. Had a bit play with some cardboard to determine how much clearance I can afford. Measured from the bottom of the headlight straight down to the underside of the bumper I can clear 410mm. So, what bumper do you have and how deep is it (measured as above) Cheers Gary Link to comment Share on other sites More sharing options...
Ewen Posted June 27, 2006 Share Posted June 27, 2006 measuring first ? thats far too sensible my fellow Northumbrian Link to comment Share on other sites More sharing options...
Big Ads Posted June 27, 2006 Share Posted June 27, 2006 good question! some1 with a do-luck bumper plz!! Link to comment Share on other sites More sharing options...
connor66 Posted June 27, 2006 Author Share Posted June 27, 2006 Ewen, I'll have a quiet word with myself... can't live with the shame of being too sensible. Adam, someone in another thread indicated the do-luck was "approximately 480mm". I can't speak for how accurate that is, but if it's right, it's way too low for me Link to comment Share on other sites More sharing options...
Ewen Posted June 27, 2006 Share Posted June 27, 2006 Ewen, I'll have a quiet word with myself... can't live with the shame of being too sensible. I did it the wrong way round a week or so ago....had to re-build the drive. Worth it though. Link to comment Share on other sites More sharing options...
uk-rich Posted June 27, 2006 Share Posted June 27, 2006 i asked the same question, got told a do luck is about 16" from headlight to lowest point. speak to jurgen on here, i very nearly got one from him Link to comment Share on other sites More sharing options...
knight-racer Posted July 1, 2006 Share Posted July 1, 2006 hmm.. maybe the measurements i made were wrong.. looking at it, the front is about level with the side skirts.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now