hodge Posted May 21, 2006 Share Posted May 21, 2006 Hi everyone. Ive got a problem with my dash lights. Its the top right pannel the 1 with, I think its the 2 oil lights and the engine warning light. The problem is they wont come on, well thats unless I bang my hand on top of the dash where the lights are. What can I do to fix this. Link to comment Share on other sites More sharing options...
markrzs Posted May 21, 2006 Share Posted May 21, 2006 Don't BANG hard !! Unscrew in think the 6 screwson the underside of the panel and check the connections. Good luck Link to comment Share on other sites More sharing options...
hodge Posted May 21, 2006 Author Share Posted May 21, 2006 Ive read some threads about referbishing the connectore would this be the same procedure for this. Link to comment Share on other sites More sharing options...
JustGav Posted May 21, 2006 Share Posted May 21, 2006 Dry joints usually... take the unit it and check the soldering on the wiring inside it... you will usually see it looking a little bit dull.. 5 minute job... and VERY worthwhile since it is your oil warning light. Link to comment Share on other sites More sharing options...
Supra ST Myster Posted May 21, 2006 Share Posted May 21, 2006 you will see when you open it up that the solder joint where the plug is soldered to the PCB will all be cracked or most of around the actual pins of the plug, just resolder them and it will all work! Common problem Link to comment Share on other sites More sharing options...
hodge Posted May 21, 2006 Author Share Posted May 21, 2006 Cheers guys ill give that a try and give you all the feedback. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now