Bloody Emanage!

[Tricky-Ricky]

This is doing my head in! wired my blue emanage about four weeks ago, but only connected it after my decat, and noticed after a couple of drives that an error code was being flashed, 24 which is no signal from no 4 injector! was not there the first couple of drives, anyway got the meter out and went through everything, no problems? yesterday after getting the car sorted after the seal went, and after a drive the code was back! so far i have ascertained that, on first start both cold and warmed up there is no code, all starts after that code 24:( just been through all the injector wiring again and no problem, slightly different approach, i disconnected each injector in sequence and checked the fault codes, and sure enough, they came up as they should even on two wires disconnected! BUT the very odd thing is injector no 4 code never showed up!?? now the damm thing is not showing any codes, even after three starts! but for how long??