Ark Posted May 4, 2006 Share Posted May 4, 2006 Chaps, Scene setting: '97 TT6, stock twins, exhaust and mid-pipe, plugs...able to make 1.2 bar easily enough. I've got my SBC set to manual, where you set a boost ratio, rather than the actual pressure you want. I'd _like_ to switch to auto and set the actual pressure, but the manual suggests that the controller won't work properly on twin, sequential or high-boost cars. Does anyone run their SBC in auto mode? Does it do it's thing properly? Thanks. Link to comment Share on other sites More sharing options...
jason m Posted May 4, 2006 Share Posted May 4, 2006 It needs to be set to manual as I think the sequential nature of the twins confuses it. Link to comment Share on other sites More sharing options...
SkyJawa Posted May 4, 2006 Share Posted May 4, 2006 Twin turbos have to run manual. Single turbos should too - the response in auto is crap, I tried it. Link to comment Share on other sites More sharing options...
Ark Posted May 4, 2006 Author Share Posted May 4, 2006 OK cool. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now