uk-rich Posted March 18, 2006 Share Posted March 18, 2006 just got a few of these gauges, seeing as i can't read jap squiggle, how do you set the warning points etc ?, away from home at present so unable to fiddle with them boost gauge oil pressure ex temp thanks Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted March 18, 2006 Share Posted March 18, 2006 If they are like the HKS ones, hold down the memory button until the needle moves and a light stays on. Then twist the warning to set the location of the warning to activate. Link to comment Share on other sites More sharing options...
terribleturner Posted March 18, 2006 Share Posted March 18, 2006 One of them is a hex button on the front. Twist it and the red warning light will flash. Then just move it to where you want the warning and leave. After about 3/4 seconds it'll stop flashing and job done. Link to comment Share on other sites More sharing options...
uk-rich Posted March 18, 2006 Author Share Posted March 18, 2006 so what is the memory button for ? Link to comment Share on other sites More sharing options...
mikeyb10supra Posted March 18, 2006 Share Posted March 18, 2006 peak hold Link to comment Share on other sites More sharing options...
uk-rich Posted March 18, 2006 Author Share Posted March 18, 2006 cheers Link to comment Share on other sites More sharing options...
terribleturner Posted March 18, 2006 Share Posted March 18, 2006 Yeah if you push it once a green light will come on and the highest point it measured so far will be shown. To clear it hold down the memory button till it flashes and let go. Job done Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now