Alex Posted February 19, 2006 Share Posted February 19, 2006 But you could change the position of the MAF sensor to after the turbo. That way it will not matter if you have a non-recirc bov. No you can't. You'll just heat it up and mess up the fueling...MAF's are heat based. A wire is heated up and as air flow increases it cools the wire and changes the resistance, this resistance is known by the ECU and it changes the fuelling to suit. Put it in the heated airstream from the turbos will just screw all the figures. If it didn't matter, toyota would probably have mounted it by the intake manifold.... Link to comment Share on other sites More sharing options...
nickyboy Posted February 19, 2006 Share Posted February 19, 2006 What about after the intercooler? Link to comment Share on other sites More sharing options...
Alex Posted February 19, 2006 Share Posted February 19, 2006 What about after the intercooler? no Link to comment Share on other sites More sharing options...
nickyboy Posted February 19, 2006 Share Posted February 19, 2006 ok I give up. Link to comment Share on other sites More sharing options...
Supra-Dupra Posted February 19, 2006 Share Posted February 19, 2006 Was just adding another angle with the single thing! My UK spec is inferior, but my single is superior! Work that one out too lazy, its rag week in college am going to spend the next week inside some young one ! Gud luck !! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now