daboss Posted January 19, 2006 Share Posted January 19, 2006 hey guys sorry for bein pain in the*** i had a crash months ago and the airbag light apear on the dash board and now the abs light is on too what shall i do. Link to comment Share on other sites More sharing options...
ardasaliah Posted January 19, 2006 Share Posted January 19, 2006 http://www.mkiv.com/techarticles/index.html#problem_solvers Check out the problem solver links hope you get it sorted. PS try the search button at the top for key words like "ABS light". brings up loads of stuff. Link to comment Share on other sites More sharing options...
daboss Posted January 19, 2006 Author Share Posted January 19, 2006 i found the airbag thin not the abs breaking system? Link to comment Share on other sites More sharing options...
ardasaliah Posted January 19, 2006 Share Posted January 19, 2006 1. Turn your ignition *on* 2. In the diagnostics port, unplug the short connector from the bottom right (it's a bit of metal that joins two pins) 3. Use a jumper wire on pins TC and E1 4. Your ABS warning light will now behave like the check engine light, as in: "If system is functioning properly, ABS light will flash 2 times per second. If a malfunction is detected, 4 seconds will elapse, then ABS light will begin flashing 2-digit DTC. ABS light will flash first digit of DTC, followed by a 1.5-second pause, then second digit of DTC. If 2 or more DTCs are stored, a 2.5-second pause will separate DTCs. After all DTCs are flashed, there will be a 4-second pause, then all DTCs will repeat." ('DTC' being the error code) See if you have any stored codes - post 'em up if you do and I'll look up the errors. Provided by IAN C Do a search for abs problem - loads of info Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now