Tom Posted January 14, 2006 Share Posted January 14, 2006 Well I'm finally getting round to do this today, the switch (pics attached) has 3 prongs on the back and the led on the switch is meant to light up when the rear fogs come on, can someone tell me how this should be wired up please. Thanks in advance Tom. Link to comment Share on other sites More sharing options...
Supra ST Myster Posted January 14, 2006 Share Posted January 14, 2006 well one of the legs will have 0V going to it, another will have a 12V feed when the lights are turned on, (this is normally the geen/brown wire that goes to the dimmer switch) and the other leg is the switched 12V to the fog light, and obviously you will need the 0V on the other side of the fog light at the back unless you are using your cluster??.. now the 2 silver legs are the 12V and the gold is the 0V, but just to make sure, put a multi meter on the silver legs and switch it on and if it shows it has closed or opened you know thats the 12V Link to comment Share on other sites More sharing options...
Tom Posted January 14, 2006 Author Share Posted January 14, 2006 Ok great, thanks, the problem I had was that my wires went missing somehow so I'm having to wire it all up again, I'll try taking a 12v feed from the dimmer. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now