SkyJawa Posted August 22, 2003 Share Posted August 22, 2003 From what I can gather this needs the 1:1 signal input on my jspec after the mph conversion in order to work properly. Now, my cruise was getting the old 1.:1 signal as it only worked up to 70mph which I've sorted by splicing the odo mph input wire to the cruise input, so based on this the steering should still be right too and receiving the 1:1 signal like the cruise was? Just wanted to check nothing needed doing to it Link to comment Share on other sites More sharing options...
THOR Racing Posted August 23, 2003 Share Posted August 23, 2003 from the information given you are correct. The fact you had to change the cruise signal to get it to work above 70MPH means the odometer output signal must still have been untouched 1:1 (i.e. you still have it in KPH or have used the 1:1 output from the TRL DSC converter) and thus yes the PPS will still be receiving the 1:1 signal as well. Regards Pete Link to comment Share on other sites More sharing options...
SkyJawa Posted August 23, 2003 Author Share Posted August 23, 2003 Thanks Pete Thats what I thought, it wasn't done with the TRL DSC by the place I bought it from, so I've had to just change the cruise manually! At least I know I can leave the steering and its right - cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now