bens747 Posted December 20, 2005 Share Posted December 20, 2005 Any advice on how easy is to remove and replace the side electric windows on me Soop. I need to retint them. Thank in advance for you help guys Link to comment Share on other sites More sharing options...
JamesG Posted December 20, 2005 Share Posted December 20, 2005 Wouldn't it be easier to leave the windows in place? I'm pretty sure professional places don't remove anything. Taking off the door cards would give you a bit more space if you needed it. Link to comment Share on other sites More sharing options...
bens747 Posted December 21, 2005 Author Share Posted December 21, 2005 Thanks mate: Well was thinking of doing it that way but thought I would get a better finish if they were out but good point. Will have a go that way and if it goes a bit Pete Tong will have to try a different approach .... Link to comment Share on other sites More sharing options...
Soop Dogg Posted December 21, 2005 Share Posted December 21, 2005 Don't try to remove the quarter lights. They're a nightmare to get out and the chances are you'll break them if you don't have the right tools and a lot of patience! Link to comment Share on other sites More sharing options...
markrzs Posted December 21, 2005 Share Posted December 21, 2005 Don't try to remove the quarter lights. They're a nightmare to get out and the chances are you'll break them if you don't have the right tools and a lot of patience! Good advice mate ! Good luck Ben Link to comment Share on other sites More sharing options...
Jake Posted December 21, 2005 Share Posted December 21, 2005 The door windows are quite easy to take out. Door card off, then take off the big black metal bracing plate, then undo the three fasteners with blue surrounds that go through the glass and lift it out. Mark the postion of the fasteners on the glass before removing them. Makes it a lot easier when reassembling - otherwise you'll have trouble getting the alignment right Link to comment Share on other sites More sharing options...
supRo Posted December 22, 2005 Share Posted December 22, 2005 Tinting front windows - Taking door card off only is sufficient to get good coverage. Rear quarter windows - They can be cut out and rebonded by someone who knows what they are doing! I'd just tint them over. Are you doing it yourself Ben? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now