Elliot Posted December 3, 2005 Share Posted December 3, 2005 My girlfriend bought me an Isotta Katiena steering wheel for my birthday a few months ago, and a Momo boss. I've been working away a lot of the time & back in Swindon on Monday but thought I might give it a try tomorrow (Sunday). So...basicly...what's involved? I've done a search, but can't find any info about taking the stock wheel off & fitting an aftermarket one. To save me starting the job, then giving up after 5 mins as I don't have a clue, can anyone give any advice or suggestions? Cheers Elliot PS I don't have an airbag! Link to comment Share on other sites More sharing options...
LeeT Posted December 3, 2005 Share Posted December 3, 2005 you may want to take a photo of your momo boss kit and post it on here before you go through the effort of taking the steering wheel off and realise it doesnt fit:( i was told that no momo bosses will fit the supra, dont know how true that is Link to comment Share on other sites More sharing options...
Elliot Posted December 3, 2005 Author Share Posted December 3, 2005 I hope that isn't true, as it was one of the traders on here who recommended it and it took around 2 months to arrive! Link to comment Share on other sites More sharing options...
suprasport Posted December 3, 2005 Share Posted December 3, 2005 that looks right to me the oblong hole in boss fits over junction block (pic) remove screws under steering column, remove front of wheel, remove the large nut on shaft and pull like fuc*. please note mine did not have airbag so not sure about any precautions or removal of that Link to comment Share on other sites More sharing options...
Elliot Posted December 3, 2005 Author Share Posted December 3, 2005 For those that are interested, here is a photo of the wheel. The yellow glow is just flourescent (spelling?) light, it looks much nicer in the flesh! Link to comment Share on other sites More sharing options...
Elliot Posted December 3, 2005 Author Share Posted December 3, 2005 that looks right to me the oblong hole in boss fits over junction block (pic) remove screws under steering column, remove front of wheel, remove the large nut on shaft and pull like fuc*. please note mine did not have airbag so not sure about any precautions or removal of that Thanks for that. I'm still not sure I 100% know what I'm doing, but I'll dive in tomorrow anyway & see how it goes! Watch this space Link to comment Share on other sites More sharing options...
LeeT Posted December 3, 2005 Share Posted December 3, 2005 that boss will definitely NOT fit. trust me Link to comment Share on other sites More sharing options...
suprasport Posted December 3, 2005 Share Posted December 3, 2005 that boss will definitely NOT fit. trust me it looks like mine but will not argue the point, there are a few threads on here about changing the steeing wheel though Link to comment Share on other sites More sharing options...
LeeT Posted December 3, 2005 Share Posted December 3, 2005 it looks like mine but will not argue the point, there are a few threads on here about changing the steeing wheel though the hole isnt big enough for the connector block and it is in the wrong place. you could modify it but it would be a bodge up. envy supply ones that fit for arond £50 iirc as do whifbitz which are slightly dearer. btw, i tried the same boss on my car last week just to prove the point Link to comment Share on other sites More sharing options...
Elliot Posted December 3, 2005 Author Share Posted December 3, 2005 Doesn't sound good I'll check tomorrow anyway I think just to work out about taking the wheel off etc for the future. I'll be VERY pissed off if/when it does not fit as my girlfriend took the traders good word about buying this from him, whilst he took her good money and she waited a hell of a long time for it as well... Link to comment Share on other sites More sharing options...
Elliot Posted December 3, 2005 Author Share Posted December 3, 2005 it looks like mine but will not argue the point, there are a few threads on here about changing the steeing wheel though Is yours the C 7728? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now