Shortacus Posted July 5, 2018 Share Posted July 5, 2018 Can anyone give any information on the seal arrangement of the oil cooler to block - I have full Toyota engine gasket kit but there doesn't seem to be any gasket that fits the oil cooler on the block side...also pretty sure mine never had anything when I removed it but I doubt that Mobile will never let me upload photos always fails But it is the block to oil cooler bracket I'm looking for advice on.. Quote Link to comment Share on other sites More sharing options...
Kristian_Wraae Posted July 5, 2018 Share Posted July 5, 2018 It is sealed with an O-ring and torqued to 88 Nm. Quote Link to comment Share on other sites More sharing options...
Shortacus Posted July 5, 2018 Author Share Posted July 5, 2018 It is sealed with an O-ring and torqued to 88 Nm. Cheers mate, guess its off to try and find a o ring that fits, not impressed with this gasket kit at all, £300+ quid and no egr cooler gasket or oil cooler o ring! Quote Link to comment Share on other sites More sharing options...
Kristian_Wraae Posted July 5, 2018 Share Posted July 5, 2018 I think the part number is 90301-68004 Quote Link to comment Share on other sites More sharing options...
Shortacus Posted July 5, 2018 Author Share Posted July 5, 2018 (edited) It is sealed with an O-ring and torqued to 88 Nm. Cheers mate, I'll try get it ordered or at least find out the size! Edited July 5, 2018 by Shortacus (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.