teddan Posted March 14, 2016 Share Posted March 14, 2016 I am under way to install my 4 point harness. The rear fixing point will be in my cage but unfortunately the plan to was attach the lap belts to the original seat belt mounting holes on the floor with a couple of 7/16" UNF eyebolts was not possible at the center consol side, only to the door side. How did you guys do it for the lap belts? Link to comment Share on other sites More sharing options...
charlton Posted March 15, 2016 Share Posted March 15, 2016 I didn't fit mine but I think my mounting holes were re-threaded slightly larger to accommodate some high tensile bolts. I don't have pics to hand but can get some tomorrow if that helps? Link to comment Share on other sites More sharing options...
teddan Posted March 17, 2016 Author Share Posted March 17, 2016 Sorry for the late reply! I tried to read all rules regarding this and my conclusion is that the factory holes on the sides will not fulfil the requirement that the belts should be in an angle of 45 degrees backwards. Link to comment Share on other sites More sharing options...
teddan Posted March 17, 2016 Author Share Posted March 17, 2016 http://www.framautolitedragway.co.nz/files/MDI_Track_Rulebook_30SEP15.pdf page 19. At least we have the same regulation in sweden, For you guys in don't know Link to comment Share on other sites More sharing options...
ashloys Posted March 18, 2016 Share Posted March 18, 2016 I'd also be interested in this. I've a set of Takata harnesses sitting here from an old car I'd like to fit whenever I get some new bucket seats in the future! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now