hodge Posted August 3, 2015 Share Posted August 3, 2015 Hi guys Is it possible to run a dash2 display as well as a Toucan display from an S6? Cheers John Link to comment Share on other sites More sharing options...
johnny g Posted August 4, 2015 Share Posted August 4, 2015 I'm guessing you could run one from the CAN and one from the Serial? Link to comment Share on other sites More sharing options...
T2 MSW Posted August 4, 2015 Share Posted August 4, 2015 I don't see why not assuming its not an old S6 and actually has the CAN module on it. The CAN is a network so can't see why you can't have multiple things connected to it. The Dash2 CAN convertor can also have multiple things chained on it (i.e Dash2 & Datalogger). The Syvecs would be the only thing broadcasting on the network so would just need to connect multiple items to the + and - on the network. Think Pat has also replied to one of your old posts on the Syvecs forum regarding the same thing - http://www.syvecs.co.uk/forum/viewtopic.php?f=6&t=233&p=1076&hilit=CAN+network&sid=64490840a1ade3b01ca71b40ddfd14fa#p1076 Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 4, 2015 Share Posted August 4, 2015 yes as i do... Link to comment Share on other sites More sharing options...
hodge Posted August 5, 2015 Author Share Posted August 5, 2015 So if I'm just connecting the + and - together on the can input cables from the toucan and dash2 and then to the syvecs, is that correct? Sounds simple enough. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now