R154 help

[theredone]

What is needed for a r154 conversion and rough price for the lot

I'm currently using a w58 and would any parts I currently have work with a r154

[garethr]

Off the top of my head...

-- R154 gearbox

-- 1JZ bellhousing if the gearbox wasn't originally on a 1JZ (Toyota or aftermarket)

-- 1JZ-GTE flywheel (Toyota or aftermarket)

-- new flywheel bolts (Toyota or aftermarket e.g. ARP)

-- flywheel bolt locking ring

-- pilot bearing (6201-2RS IIRC, either Toyota or decent quality from a bearing supplier/eBay)

-- 1JZ-GTE or 7M-GTE clutch kit (uprated necessary for a 2JZ-GTE?)

-- clutch release bearing if not in the clutch kit

-- clutch cover bolts if not in the clutch kit

-- clutch release bearing hub and various circlips, shims, and washers if not with the 'box (from Toyota, or Driftmotion sell a kit) - replace the washers and circlips regardless

-- rear main seal (probably worth replacing it when the 'box is out)

-- gear shift extension if the gearbox is from a Mk3 Supra

-- gearbox mount?

-- prop shaft (not sure if you can use Toyota parts or if a custom prop is needed)

 

http://www.mk3supra.org/topic/596-guide-fitting-a-clutch-on-the-7mgte-r154/

Edited April 3, 2015 by garethr (see edit history)