Timlowthian Posted March 29, 2015 Share Posted March 29, 2015 Hi All, I now have a tt engine complete with loom and ecu's ready to drop in my Manual NA. I just have a few last questions before I start ripping everything apart. First off I have read and printed the excellent guide on here for the conversion but the engine and loom I have is from an Auto and I read that it may not start as the starter relays are different. Has anyone had any problems or any tips regarding this? I have read about cutting the Fuse box plug off and the reverse light switch, are there any other wiring mods that I need to watch for while doing this? Lastly any tips regarding the general conversion. Tim Link to comment Share on other sites More sharing options...
LOGIE Posted March 29, 2015 Share Posted March 29, 2015 I sourced a TT engine BAY loom with the fuse box and the 2 looms behind the dash, as these are different from NA ( my thinking was if it all went Pete Tong I could just drop the NA lump back in without trying to put wiring back to the way it was. Im very thorough and like to cover all possible f~~k ups before they happen. Good luck and have patience DONT RUSH IT Link to comment Share on other sites More sharing options...
Timlowthian Posted March 30, 2015 Author Share Posted March 30, 2015 Yeah I am wondering if this is the way to go, not sure how easy sourcing the loom will be though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now