Hartmann Posted November 4, 2013 Share Posted November 4, 2013 hey there lads . can some of you please post a picture of how you have placed the oilcooler in the bumper area behind the left duct ? would help alot i am not quit sure on how to run the IC pipes ... the way i have it now dont seem to be any good tobias Link to comment Share on other sites More sharing options...
pedrosixfour Posted November 4, 2013 Share Posted November 4, 2013 Since that picture was taken the old power steering cooler hard lines & the windscreen washer bottle have been removed. My cooler sits quite a ways back & dead square to the airflow and the road, but I don't have FMIC pipework to contend with. It isn't properly ducted as such but it does work fine. I'd imagine anyone with a cooler & FMIC pipe to work around has the cooler a lot closer to the duct itself and may have (depending on its size) it set at a bit of an angle to the airflow and/or road. Link to comment Share on other sites More sharing options...
Hartmann Posted November 4, 2013 Author Share Posted November 4, 2013 thanks mate yes i will have FMIC piping to deal with and have my oilcoller in roughly the same place as you. would be nice if the oil cooler could come forward and the FMIC piping could go behind the oil cooler Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now