TubbyTwo Posted July 23, 2012 Share Posted July 23, 2012 Mine almost fits ok, fouls the bonnet stay holder tho. Link to comment Share on other sites More sharing options...
p3te Posted July 23, 2012 Author Share Posted July 23, 2012 Take your A/C out. You don't use it anyway Pete. You'll gain a few HP and your plate will fit. Win win situation alot of hastle just to fit this tho, id rather keep the a/c and not fit the plate if it comes to that, im thinking of drilling a hole for the air con pipe to poke through, would it drill ok or would it frey and mess the weave up? Link to comment Share on other sites More sharing options...
hodge Posted July 23, 2012 Share Posted July 23, 2012 I would drill a smaller hole and then file it to size. Put masking tape over where you are drilling it so save it from splitting and don't push too hard. Link to comment Share on other sites More sharing options...
p3te Posted July 23, 2012 Author Share Posted July 23, 2012 whats this stuff like is it tough or brittle and easy cracks? it seems pretty thin Link to comment Share on other sites More sharing options...
Paul Posted July 23, 2012 Share Posted July 23, 2012 It will drill, very brittle though so a sharp small drill first and then use a file to ease it out. It won't frey or mess up the weave as the resin is holding it all together, just support it well when drilling or using a file. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now