Colin-mkiv Posted April 1, 2012 Share Posted April 1, 2012 I have had an intermittent issue with my temp gauge, I was looking for the sender and have found the single pin connector for the sender (white plug, blue/yellow wire) hanging about under the inlet manifold not connected to anything. I must have dislodged it and now cant see where it goes back to. cAN ANYONE ADVISE THE EXACT LOCATION OR GIVE ME A IC OF WHERE TO FIND THE SENDER UNIT??? tHANKS IN ADVANCE. Link to comment Share on other sites More sharing options...
Thomas.B Posted April 1, 2012 Share Posted April 1, 2012 If i got you correctly the sensor is under the upper rad hose on the engine side. You should have a ECU one and a temp one. Link to comment Share on other sites More sharing options...
Colin-mkiv Posted April 1, 2012 Author Share Posted April 1, 2012 If i got you correctly the sensor is under the upper rad hose on the engine side. You should have a ECU one and a temp one. yES, YOU GOT ME RIGHT, tHANKS FOR THAT. oNCE i HAD REMOVED THE BRACING BAR AND GOT MY GREAT BIG MAN HAMS IN THERE i FOUND IT, GAUGE NOW WORKS a OK Wish I could type and look at the screen at the same time...... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now