Hellstrom Posted March 11, 2012 Share Posted March 11, 2012 Hi, anyone know whats acceptable results when doing a leakdown test on a cold engine? just bought a tester and iam probebly going to assembly the cylinderhead this week and do a test just to check everything is okay before getting it fully assembled and lifting in to the bay. regards Johan Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted March 11, 2012 Share Posted March 11, 2012 I usually do my leak-down tests cold or only just warm, and i usually go by no more than 15% max, thats for a std engine. Link to comment Share on other sites More sharing options...
Hellstrom Posted March 11, 2012 Author Share Posted March 11, 2012 Will put the cylinder head on either tomorrow or tuesday so ill see by then. Iam probebly going to use oil in the cylinders as my bores are fresh honed and not run in yet. Just want to make sure its not leaking unresonsble. Thanks for info Regards Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now