monkey76364 Posted July 22, 2005 Share Posted July 22, 2005 Im sure my tracking is out on the Supe ! Whats the best way to tell and where is a good place to go get it looked at, is Kwick Fit good or bad for this, wasnt sure what clearnace they have on the ramp for the front witht eh weilside nose? I have had them do it on other cars but not this one ??? What do you all recomend, would like to get it done this weekend !!! Link to comment Share on other sites More sharing options...
JohnA Posted July 22, 2005 Share Posted July 22, 2005 The quickfit a few miles from me (st Paul Cray's road) can do a good job. Cheap, too. Just off M25J3 from you, not too far. Link to comment Share on other sites More sharing options...
monkey76364 Posted July 22, 2005 Author Share Posted July 22, 2005 I have one in Dartfford and just up the road in Erith, just wasnt sure if they were the best to atke it too or not !!! Link to comment Share on other sites More sharing options...
RICHARDA Posted July 22, 2005 Share Posted July 22, 2005 I'm afraid the quality of workmanship will vary as to which Kwik fit you take it too. For my sins I work part time at one whilst re studying, best of luck. Watch them do it if you can. HTH Rich Link to comment Share on other sites More sharing options...
JohnA Posted July 22, 2005 Share Posted July 22, 2005 I posted mine because it is not too far from you and I had mine done there too. Of course I was watching like a hawk, that goes without saying. Only a handful of KwikFits in the UK have the 4wheel-alignment hardware. Link to comment Share on other sites More sharing options...
monkey76364 Posted July 22, 2005 Author Share Posted July 22, 2005 I posted mine because it is not too far from you and I had mine done there too. Of course I was watching like a hawk, that goes without saying. Only a handful of KwikFits in the UK have the 4wheel-alignment hardware. lol... so I think I will take it there then, did you get the 4 wheel-alignment done then and at what price !!! Link to comment Share on other sites More sharing options...
RICHARDA Posted July 22, 2005 Share Posted July 22, 2005 I posted mine because it is not too far from you and I had mine done there too. Of course I was watching like a hawk, that goes without saying. Only a handful of KwikFits in the UK have the 4wheel-alignment hardware. John believe it or not I have witnessed "colleagues" just wire brush and spray with WD40 the track rod ends, and consider this "job done". Link to comment Share on other sites More sharing options...
monkey76364 Posted July 22, 2005 Author Share Posted July 22, 2005 John believe it or not I have witnessed "colleagues" just wire brush and spray with WD40 the track rod ends, and consider this "job done". ohhhh fill me with confidence why dont you lol what do you recomend then ??? Link to comment Share on other sites More sharing options...
JohnA Posted July 22, 2005 Share Posted July 22, 2005 John believe it or not I have witnessed "colleagues" just wire brush and spray with WD40 the track rod ends, and consider this "job done". I believe it, that's why I watch like a hawk. On these machines you can see clearly the settings before and after, it's easier to do the job rather than muck about. Another joker 10yards from them (Q Tyres or something) wanted me to leave the car for test drives, only to do a single track angle. yeah right.... Link to comment Share on other sites More sharing options...
monkey76364 Posted July 22, 2005 Author Share Posted July 22, 2005 I believe it, that's why I watch like a hawk. On these machines you can see clearly the settings before and after, it's easier to do the job rather than muck about. Another joker 10yards from them (Q Tyres or something) wanted me to leave the car for test drives, only to do a single track angle. yeah right.... Take it out and thrash the s**t out of it they mean lol I think I will pop down to Kwick Fit then in the morning, thats the one on the bypass isnt it (St Pauls Cray Rd) !?!?! And ask to watch so i know what to look for lol Link to comment Share on other sites More sharing options...
JohnA Posted July 22, 2005 Share Posted July 22, 2005 You don't have to ask anything, you can watch from the parking area without entering their 'zone' Orpington bypass, that's it. First come first served it is, I went 08:30 first thing in the morning. Givem a ring first. (yell.com) Link to comment Share on other sites More sharing options...
RICHARDA Posted July 22, 2005 Share Posted July 22, 2005 ohhhh fill me with confidence why dont you lol what do you recomend then ??? Monkey, watch em and you should be OK. I'm sure they will have special interest in your car anyway. Link to comment Share on other sites More sharing options...
monkey76364 Posted July 22, 2005 Author Share Posted July 22, 2005 Just called the one in Orpington (Kwick fit) its gona be £49 for the check and one adjustment if needed or £74 for the maximum adjustment if needed on the 4 wheel - adjustment set up... is that good ???? Link to comment Share on other sites More sharing options...
JohnA Posted July 22, 2005 Share Posted July 22, 2005 yep, that's it. Not bad prices. See if you can spray WD40 in all adjusters overnight. You don't want bits seized or breaking. In my case I asked him to leave something alone if it doesn't budge. The rear left camber was left a bit off, better than crippling the car methinks... Link to comment Share on other sites More sharing options...
monkey76364 Posted July 22, 2005 Author Share Posted July 22, 2005 will have to get the can out when i get in and spray the lot lol !!! will have to look on here though to see exactley what bits im spraying though ha ha ha ha Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now