TRD DAN Posted August 31, 2011 Share Posted August 31, 2011 can anyone just confirm for me that the map sensor on my j-spec tt6 will be a black and yellow wire going to pin 41 of the ecu which is second row up on the very far end of the right (E9) BLOCK CONNECTER a picture would be perfect just trying to wire in my fcd and makeing sure i get it right cheers dan Link to comment Share on other sites More sharing options...
TRD DAN Posted August 31, 2011 Author Share Posted August 31, 2011 any help on this ?? cheers dan Link to comment Share on other sites More sharing options...
Ryan.G Posted August 31, 2011 Share Posted August 31, 2011 Hi Dan The wire is indeed Black with a yellow trace but it is located in pin position 62 on E9 connector Labeled PM1 or PIM Link to comment Share on other sites More sharing options...
TRD DAN Posted August 31, 2011 Author Share Posted August 31, 2011 ahh right cheers dude on the pin out spreadsheet at the top of the tech page it says that PM1 is turbo pressure sensor and that pin 41 is TPS AND MAP , just wanted to clear anything up before i got it wrong lol cheers dan Link to comment Share on other sites More sharing options...
TRD DAN Posted September 2, 2011 Author Share Posted September 2, 2011 Ryan I know you have told me what it is lol but is possible you could look at the ecu pin out spreadsheet off here to confirm that's wrong ?? Just so it can be amended for other users ? Cheers dan Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now