Guest TTSUPRA Posted April 15, 2011 Share Posted April 15, 2011 Hi guys, Need some help please. Been working on my project transfered the engine gear box all the wiring.car starts. but my prolem is with the clutch iv installed the clutch pedal but first it stays down then i put a black spring now it goes in and comes back up but when pressing the clutch it wont let me put it in any gear,dont know what it could be. Can any 1 help? cheers Link to comment Share on other sites More sharing options...
TRD DAN Posted April 15, 2011 Share Posted April 15, 2011 have you check that when depressing the pedal that in turn is pushing the slave and moving the clutch fork ? dan Link to comment Share on other sites More sharing options...
tkddav3 Posted April 15, 2011 Share Posted April 15, 2011 +1 ^ otherwise ur clutch pedal doin fook all Link to comment Share on other sites More sharing options...
Guest TTSUPRA Posted April 16, 2011 Share Posted April 16, 2011 Thanks guys for the reply. I think i know what i was doing wrong, i havent bleed the clutch therefore the clutch pedal is on the floor and im sure thats why its not allowing gears to work. cheers guys for the help, (if i do have any probs i will ask again lol) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now