kwalker705 Posted March 28, 2011 Share Posted March 28, 2011 After deciding not to continue with my single turbo aristo project part's for the conversion will now be up for sale. Single turbo kit The turbo is a Holset H1C turbo. It has a 3" V-band connector on the exhaust and a 90' bend welded onto the inducer. Only oil cooled. The turbo has only been ran when road testing the car to check for leaks etc. Turbo has only seen 0.8Bar of boost. This turbo is believed to be good for up to 600bhp. Manifold is believed to be an XS power manifold. It was a T4 flange and has had a T3 flange/adaptor TIG welded onto it. I had the manifold braced up to ensure it had a little extra support . Wastegate is a 50mm XS power wastegate Screamer pipe has been modified and rewelded in a slightly different position so it clears the Aristo steering column 3" Downpipe with v-band flange and fitting for standard lambda sensor. Oil feed line is a braided line witht he correct fittings. A blank for the 2nd oil feed will be supplied with the kit. A modified supra/aristo oil drain will be supplied also to fit the turbo. Price - £750 plus postage Driftworks Ultimate Oil cooler kit Brand new. Parts were only removed from packaging to check them. Kit comes with oil cooler, filter relocator,sandwich plate,all braided lines,all aeroquip fitting in black and even an alloy shifter and vice clamps for aeroquip fittings. Price - £425 plus postage J-spec front brake calipers and pads Taken from a toyota Aristo. In excellent condition with EBC yellow stuff brake pads. Still 8mm of 'meat' left on each pad. No track use etc Price - £100 plus postage Pictures will be taken and posted up tommorow when its daylight Link to comment Share on other sites More sharing options...
Recommended Posts