djg99 Posted October 11, 2010 Share Posted October 11, 2010 Can anybody help please i'm transferring all the parts from my old intake manifold to my new polished one, the last thing i changed over was the Idle Control Valve, but at the time got distracted, then when i moved my old manifold i found this disc looking part, any ideas? I've cleaned it up as it was covered in crap and oil! And if so where does it go. Thanks... Link to comment Share on other sites More sharing options...
w41k3r Posted October 11, 2010 Share Posted October 11, 2010 is that not the valve or something im sure i read in a thread the part you clean was orange but dont take me seriously as im not sure wait for somone who knows Link to comment Share on other sites More sharing options...
dwayne Posted October 11, 2010 Share Posted October 11, 2010 looks like the inside of the idle valve to me. i know i've had one in my hand before but i couldnt be 100% sure its that EDIT: doesnt it go in the manifold before the valve? Link to comment Share on other sites More sharing options...
heckler Posted October 11, 2010 Share Posted October 11, 2010 its the one-way valve out of the idle control valve it allow air into the manifold ... it sits in the manifold, and the icv sit on top of it Link to comment Share on other sites More sharing options...
hodge Posted October 11, 2010 Share Posted October 11, 2010 It sits behind the idle control valve. Where the flange bolts on there's a large round hole. It goes in there fins upwards, then a rubber ring goes on top of it then the idle control valve bolts on and holds it all in place. Link to comment Share on other sites More sharing options...
djg99 Posted October 11, 2010 Author Share Posted October 11, 2010 :thanks:thanks: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now