Bobbystone Posted May 23, 2005 Share Posted May 23, 2005 Hello All. I have a set of alloys for sale on ebay but iv been asked if they fit a nissan skyline. Does anybody know if they are roughly the same fitment? Cheers Link to comment Share on other sites More sharing options...
garethr Posted May 23, 2005 Share Posted May 23, 2005 PCD is the same (114.3), centre bore and (standard) offset are different. Nissan centre bore (IIRC) is 66, Supra is 60.1 (so standard Supra wheels would not fit) Nissan offset (again IIRC) is 35, Supra is 50, so standard offset Supra wheels would be inset on a Skyline and might cause clearance problems. Aftermarket wheels: -- almost certainly have a very large centre bore so he'd need the appropriate spigot rings -- may well be 35 offset anyway Please note.... people often miss out the spigot rings on aftermarket wheels. This puts all the strain on the studs and not on the hub, and is not a good idea. One of the members of the Australian Soarer Club sheared the wheel studs because the rings were missing (For the same reason, spacers should locate on the hub spigot, and provide a spigot for the wheel to sit on). Link to comment Share on other sites More sharing options...
Bobbystone Posted May 23, 2005 Author Share Posted May 23, 2005 Super. The exact info i was after Cheers Mate Link to comment Share on other sites More sharing options...
michael parker Posted May 23, 2005 Share Posted May 23, 2005 Thats correct, (114.3mm) my wheels are off a skyline, they went straight on Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now