Mcgoo Posted February 25, 2010 Share Posted February 25, 2010 I've just received the above that I purchased from a club member. On getting it out of the box I noticed that it had two tiny wires poking out the side of the control unit that were obviously out of place. This concerns me as it has obviously been tampered with in some way. I have carefully opened the control unit to see where they are coming from. It appears that they may have originally been attached to the gold coloured item on the inside of the lid. Can anyone tell me what it is and if I can just re-solder it? Is this the buzzer/alarm ? or heat sink of some kind ? Also when it has previously been put back together some of the wires have been damaged I have contacted the seller for an explanation and am waiting for a reply, but I really wanted to fit this today. Can anyone help? Link to comment Share on other sites More sharing options...
Mcgoo Posted February 25, 2010 Author Share Posted February 25, 2010 Can anyone help with this? Link to comment Share on other sites More sharing options...
bluecoup Posted February 25, 2010 Share Posted February 25, 2010 its a small speaker type device as fitted in digital watches etc with alarms Link to comment Share on other sites More sharing options...
bluecoup Posted February 25, 2010 Share Posted February 25, 2010 yes you can reattach you should be able to see from the solder on wire end which goes where stick some tape over it afterwards Link to comment Share on other sites More sharing options...
Mcgoo Posted February 25, 2010 Author Share Posted February 25, 2010 (edited) Cheers bluecoup. Makes me wonder why it's been opened up in the first place, this disconnected and what else might have been touched. I'm not sure I trust it now. I don't suppose there is an easy way of testing these ebc's without fitting them is there? Edited February 25, 2010 by Mcgoo (see edit history) Link to comment Share on other sites More sharing options...
bluecoup Posted February 25, 2010 Share Posted February 25, 2010 i woulsd imagine it makes a very annoying noise like the bong for door open and keys in or reverse on a auto Link to comment Share on other sites More sharing options...
Mcgoo Posted February 25, 2010 Author Share Posted February 25, 2010 i woulsd imagine it makes a very annoying noise like the bong for door open and keys in or reverse on a auto I did think that, but you would think any user would want to know if they were over-boosting. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now