Guest daz 6576 Posted February 1, 2010 Share Posted February 1, 2010 how much is a new loom for the coilpacks on a j-spec tt cheers daz Link to comment Share on other sites More sharing options...
DSK Posted February 1, 2010 Share Posted February 1, 2010 Is it the actual loom you need or have the coil pack connector clips disintegrated? If you just need new connector clips, get them from Paul Whiffin @ GarageWhifbitz. If you need a new loom then may be worth contacting Keron to see if he has any removed from a breaker. Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted February 1, 2010 Share Posted February 1, 2010 well i got a missfire on mine and ive checked the coilpacks and they are fine but it seems like its not getting power to the coilpacks. maybe i got a dodgy loom or something. im trying to eliminate problems and narrow it down Link to comment Share on other sites More sharing options...
pistonbroke Posted February 1, 2010 Share Posted February 1, 2010 Check the ignitor pack, have you jump started the car recently? Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted February 2, 2010 Share Posted February 2, 2010 the car has been jump started before but not recently if that helps could the ignitor pack if not working properly knock out the power to 2 coilpacks. (are they in 2's is what i mean) Link to comment Share on other sites More sharing options...
pistonbroke Posted February 3, 2010 Share Posted February 3, 2010 Right, so you've eliminated the coil packs by swapping them over I take it? You're missing a spark (or it's weak in consistently the same area), check your coil pack clips have a good connection, you might have to press the connecting pinch point closer on them specific clips. It's in IanC's post about replacing the clips. Link to comment Share on other sites More sharing options...
Scott Posted February 3, 2010 Share Posted February 3, 2010 Sounds like coil pack clips. You can get a full set for less than £30 posted. Always good to do this every couple of years IMO. Link to comment Share on other sites More sharing options...
TLicense Posted February 3, 2010 Share Posted February 3, 2010 The loom itself was about £1300 new and the last time I spoke to Steve Manley about it, was discontinued. on both counts! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now