2 Gauge Pillar Pod?

[96sz]

Has anyone used the 2 gauge pillar pod sold by Cool-kitz on E-bay for £40? If so, is it any good on quality and fitting? Thinking of fitting oil pressure and temp gauges in new year, so looking for a decent pod.

[miko_supra]

link?

[96sz]

Sorry, dont know how to do links!

[ob1dude]

Fitted one 3 weeks ago. The finish is a really good match. Mine was slightly short as it finished flush with the rear panel by the top of the door. I glued two tabs to the back of it and tucked them behind the existing panel, it holds it a treat. There is also a tab on the bottom of it that sits down by the side of the dash. I filed this slightly to make it perfect, but it still fits well without going that far. I would give the quality 9/10 and 8/10 for the fit. Send Alan a message, I found him really helpful and it was taped to a wooden template for shipping so no worries about damage in the post, really pleased overall. Hope this helps.

[96sz]

Fitted one 3 weeks ago. The finish is a really good match. Mine was slightly short as it finished flush with the rear panel by the top of the door. I glued two tabs to the back of it and tucked them behind the existing panel, it holds it a treat. There is also a tab on the bottom of it that sits down by the side of the dash. I filed this slightly to make it perfect, but it still fits well without going that far. I would give the quality 9/10 and 8/10 for the fit. Send Alan a message, I found him really helpful and it was taped to a wooden template for shipping so no worries about damage in the post, really pleased overall. Hope this helps.

 

Thanks mate, really helpful. It does look a good bit of kit on the ad, but just wanted to know of anyones experiences with it.