Diane Abol Posted October 25, 2002 Share Posted October 25, 2002 ok, Ryan's car is all done and ready to go to the mappers 8=) We have one slight problem to solve first, weve spent most of today trying to get to the bottom of it !!! Fuel is not being delivered to the plugs ; we have disconnected the fuel return and there is plenty of fuel flow there; so the problem is not with the fuel pump itself. We have installed 1000cc injectors, they are the same impedance as the stock injectors - so thats not the cause. We have removed and refitted the throttle body , no signs there of anything wrong there. Tried new EFI relays - no joy. Anyone got any brainy ideas, please fire away !!! Link to comment Share on other sites More sharing options...
eyefi Posted October 25, 2002 Share Posted October 25, 2002 so the injectors rnt firing, u probably rnt on stock ecu?? ecu not programed correctly or wiring problem, sounds a bit obvious and uv probably checked this. does it work with a stock ecu? faulty injectors ?? they defo low impedance ?? Link to comment Share on other sites More sharing options...
eyefi Posted October 25, 2002 Share Posted October 25, 2002 efi fuses?? its not a case of getting fuel but no air is it?? sounds electrical or software to me. Link to comment Share on other sites More sharing options...
Alex Posted October 25, 2002 Share Posted October 25, 2002 Fuel is not being delivered to the plugs Ummm shouldn't it be delivered to the injectors!!?? Sorry couldn't resist. When you say it doesn't get to them...do they even get "wet" Ie that it hit the back side of them but then they don't feed the fuel through? If so it sounds like an electrical problem.... Link to comment Share on other sites More sharing options...
Need4Speed Posted October 25, 2002 Share Posted October 25, 2002 Does the fuel injection on these systems need bleeding when first run from dry? Link to comment Share on other sites More sharing options...
Diane Abol Posted October 26, 2002 Author Share Posted October 26, 2002 Now sorted......crank position sensor. Link to comment Share on other sites More sharing options...
Matt Harwood Posted October 26, 2002 Share Posted October 26, 2002 Nice to hear it wasn't anythying serious Link to comment Share on other sites More sharing options...
Guest Terry S Posted October 28, 2002 Share Posted October 28, 2002 Out of interest, what was the problem with the Crank Trigger Disc Justin? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now