Dave222 Posted April 25, 2005 Share Posted April 25, 2005 I have just bought a Blitz Dual Solenoid Type "R" boost controller and there are two sets of wires coming out of the back of the unit. 1 has 5 wires that plugs into the unit to supply 12Volts + & - and the same cable goes to the solenoid block. Two questions 1) does the unit require a permanent or switched 12volt supply in order to save any settings? 2)Does anyone know what the other connector is for it has only 3 wires ? as I don't have anything to plug into it or any where for it to GO !! Thanks in advance for any help you can give. Link to comment Share on other sites More sharing options...
Steve Posted April 25, 2005 Share Posted April 25, 2005 Just read the instructions i got from http://www.mkiv.com and its to connect it to a boost map anaylser?? Whatever that is Link to comment Share on other sites More sharing options...
Dave222 Posted April 25, 2005 Author Share Posted April 25, 2005 Thanks for that wasn't sure if I was missing a bit! Do you know if the unit needs a permanant 12 volt feed or just when the ignition is on ? Cheers. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now