legendswraith Posted July 20, 2009 Share Posted July 20, 2009 Bit of a shot in the dark but i bet there is someone out there who has made their own or repaired an option cable from the emanage ultimate. The question is what connectors (as in name/spec) do the option ports use? I'm going to plug the wideband into the EMU and i need to make/buy the option harness that runs from the wideband to the EMU. Is it possible or should i just buy one? Link to comment Share on other sites More sharing options...
legendswraith Posted August 3, 2009 Author Share Posted August 3, 2009 After a bit of research apparently the connectors from a pc cd - soundcard fits nicely into the option port. I have yet to check it but if it works should be a nice cheap way of making option cables Link to comment Share on other sites More sharing options...
legendswraith Posted August 21, 2009 Author Share Posted August 21, 2009 Just for info if you cut down a 4 pin audio connector from a cd drive or a floppy drive power plug from 4 to 3 pins its fits beautifully. Link to comment Share on other sites More sharing options...
legendswraith Posted August 22, 2009 Author Share Posted August 22, 2009 Addition to the info the option cable has 3 pins on the EMU the left hand pin is the 0-5v input from the wideband the centre pin is not used and the right hand pin is to the wideband earth (as you would plug it into the EMU) Sure this may be something people know but it may help in a search Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now