Scott Posted July 4, 2009 Share Posted July 4, 2009 Anyone interested in hubcentric wheel spacers? These are not to be confused with the regular tat as i made these myself in work to 0.001" with ever dimension. They are made from aircraft grade aluminium to the highest standard. I would keep them but i no longer require them due to getting a better offset wheel for my application. I can do pics etc once they are off the car. I will give them a bit of a clean etc before they go. The strength of these will be far superior to any other ones on the market due to the way i have made them. The studs have been tapped in and countersunk from the rear meaning that the full head of the bolt is there. The bolts are 8.8 tensile steel and i will also be supplying the shallow mount nuts. Pics will follow later this week when they are ready to go, any questions please ask. The material, nuts and bolts alone cost just under £50 so i'm looking for offers over that. Inferior versions of these go for well over £100. Link to comment Share on other sites More sharing options...
Jamesy Posted July 4, 2009 Share Posted July 4, 2009 pics please. is this for 4 mate? Link to comment Share on other sites More sharing options...
Scott Posted July 4, 2009 Author Share Posted July 4, 2009 pics please. is this for 4 mate? No sorry, should have said that. Its just for 2. Will try to get pics up on Monday. Cheers Link to comment Share on other sites More sharing options...
Zofix Posted July 5, 2009 Share Posted July 5, 2009 Is anything else needed for these to fit like longer struts? Or is it fine to just put these on and mount the wheel on it? Link to comment Share on other sites More sharing options...
Scott Posted July 5, 2009 Author Share Posted July 5, 2009 You actually need to grind the little tip off of the studs you have on there at the moment (none of the thread though). Nothing else required. Cheers Link to comment Share on other sites More sharing options...
Scott Posted July 6, 2009 Author Share Posted July 6, 2009 Pics added Link to comment Share on other sites More sharing options...
clarky666 Posted July 9, 2009 Share Posted July 9, 2009 I'll take them buddy. Link to comment Share on other sites More sharing options...
Recommended Posts